Predictive Intelligence for
Critical Grid Infrastructure
Transmission towers, power lines, solar farms, and substations — inspected across 50+ mile corridors per mission. Jinki delivers severity-ranked findings that identify degradation before it becomes downtime.
Six Failure Modes.
One Aerial Platform.
Every flight captures thermal, visual, and LiDAR data simultaneously. AI-assisted analysis identifies and severity-ranks these critical failure modes before they cause outages.
Vegetation Encroachment
highLiDAR-measured clearance violations along rights-of-way. Sub-meter accuracy identifies encroachment before contact events.
Insulator Damage
criticalCracked, chipped, or contaminated insulators detected via high-resolution visual and thermal contrast analysis.
Hot Joints & Connections
criticalThermal anomalies at splice points, connectors, and bolted joints. Temperature differentials flagged at 10 degrees C above ambient.
Conductor Sag
mediumLiDAR-derived sag measurements compared against design clearances. Identifies overloaded spans and thermal elongation.
Corrosion & Wear
mediumSurface degradation on towers, hardware, and conductors. AI-assisted detection of rust patterns and material loss.
Lightning & Storm Damage
highPost-event rapid assessment of arc marks, shattered insulators, bent crossarms, and conductor displacement.
Systematic Aerial Coverage
Across Your Service Territory
Automated flight planning covers every span, tower, and substation. Real-time progress tracking ensures zero missed assets.
From Reactive Maintenance
to Predictive Intelligence
6-Month Inspection Cycles
Manual crews on foot or in helicopters. Months between inspections leave assets unmonitored.
High Per-Tower Costs
Helicopter time, crew mobilization, traffic management, and equipment shutdowns make traditional inspection expensive.
Reactive Failures
Defects found only after outages occur. Emergency repairs cost 4 to 8 times more than planned maintenance.
Paper-Based Reports
Handwritten notes, inconsistent grading, and weeks of delay before findings reach maintenance teams.
340+ Miles Per Day
Automated flight paths cover entire corridors in hours. Monthly monitoring becomes standard.
Fraction of Legacy Costs
No helicopters, no road crews, no shutdowns. Aerial intelligence replaces expensive manual methods.
Predictive Detection
Thermal and LiDAR intelligence identifies failing components months before outage events.
Digital Work Orders
Severity-ranked findings with GPS coordinates, photos, thermal data, and cost estimates — delivered within 48 hours.
Three Sensor Modalities.
One Integrated Platform.
The DJI M400 RTK carries all three payloads simultaneously. Every flight captures thermal, visual, and LiDAR data — no second passes, no data gaps.
LiDAR Intelligence
L3 LiDAR Sensor
LiDAR Intelligence
L3 LiDAR SensorSpecifications
- 5-point-return scanning
- 250m effective range
- 200,000 points/sec
- Sub-centimeter accuracy
Capabilities
- Vegetation clearance measurement with sub-meter precision
- Conductor sag analysis against design tolerances
- Tower lean and structural deflection detection
- Volumetric terrain modeling for flood-risk assessment
Thermal Intelligence
H30T Thermal Payload
Thermal Intelligence
H30T Thermal PayloadSpecifications
- 640x512 resolution
- Radiometric accuracy
- -20 to 150 degrees C range
- NETD < 30mK
Capabilities
- Hot joint and connection fault identification
- Transformer thermal profiling under load
- Solar panel hotspot and string-failure detection
- Substation component health assessment
Visual Intelligence
Zoom Camera Array
Visual Intelligence
Zoom Camera ArraySpecifications
- 200x optical zoom
- 48MP sensor
- 4K video capture
- AI defect recognition
Capabilities
- Insulator crack and chip detection at 80m standoff
- Hardware corrosion classification and severity rating
- Bird nest and foreign object identification
- Asset tagging and component inventory cataloging
Your Grid Intelligence Partner
Energy Sector Specialists
Transmission, distribution, solar, and substation expertise. Our analysts understand NERC standards, vegetation management requirements, and utility maintenance workflows.
Multi-Sensor Fusion
Thermal, LiDAR, and visual data captured simultaneously and cross-referenced. Findings include temperature data, clearance measurements, and high-resolution imagery in a single report.
Actionable Deliverables
Severity-ranked findings with GPS coordinates, component ID, remediation recommendations, and estimated repair costs. Your crews get prioritized work orders, not raw data.
Zero Downtime Required
Non-contact inspection means your assets stay energized and your customers stay connected. No shutdowns, no road closures, no service interruptions.
Start Your Intelligence Scan
Three quick steps to unlock aerial intelligence for your facility.